Power adapter is included
CPU
Quad-core Cortex-A7 H.265/HEVC 4K
GPU
Mali400MP2 GPU @600MHz
Supports OpenGL ES 2.0
Memory (SDRAM)
2GB DDR3 (shared with GPU)
Onboard Storage
TF card (Max. 32GB) / MMC card slot , up to 2T on 2.5 SATA disk
16GB EMMC Flash
Onboard Network
10/100/1000M Ethernet RJ45
Onboard WIFI
Realtek RTL8189ETV, IEEE 802.11 b/g/n
Video Input
A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps
Audio Input
MIC
Video Outputs
Supports HDMI output with HDCP
Supports HDMI CEC
Supports HDMI 30 function
Integrated CVBS
Supports simultaneous output of HDMI and CVBS
Audio Output
3.5 mm Jack and HDMI
Power Source
DC input c..
The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range.
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI®
4 USB 2.0 ports
CSI camera port for connecting a Raspberry Pi camera
DSI display port for connecting a Raspberry Pi touchscreen display
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data
5V/2.5A DC power input
Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Official website..
Specifications:
BCM2711B0 (ARM Cortex-A72) 64-bit 1.5GHz quad-core
RAM 2GB
Gigabit Ethernet
802.11ac 2.4GHz/5GHz dual-band NIC
Bluetooth 5.0, BLE
USB 3.0 x 2, USB 2.0 x 2
micro HDMI x 2 (supports 4Kp60)
PoE header (supports PoE HAT)
MicroSD slot
3.5 mm audio jack
40PIN GPIO header
CSI camera interface
DSI display interface
USB Type C power supply (5V/3A or above)
Condition: Carefully USED/Working
The real products are on all pictures
No Photoshop on the products (sometimes background only)..
Specifications:
BCM2711B0 (ARM Cortex-A72) 64-bit 1.5GHz quad-core
RAM 4GB
Gigabit Ethernet
802.11ac 2.4GHz/5GHz dual-band NIC
Bluetooth 5.0, BLE
USB 3.0 x 2, USB 2.0 x 2
micro HDMI x 2 (supports 4Kp60)
PoE header (supports PoE HAT)
MicroSD slot
3.5 mm audio jack
40PIN GPIO header
CSI camera interface
DSI display interface
USB Type C power supply (5V/3A or above)
Condition: Carefully USED/Working
The real products are on all pictures
No Photoshop on the products (sometimes background only)..
Features:
For Use With: Raspberry Pi 3 Model B+ / B / 2B / B+/ 4 / 5. Only Pi 4 / 5 have USB 3 port
Supports up to 1TB mSATA solid-state drive (SSD)
USB 3.0 to SATA 6Gb/s Bridge Controller
Bus powered, additional AC adapter (optional)
Package Included:
1 x X850 Expansion board
1 x Pack of ALL screws
Tests to compare (mSATA Pi 5 vs SATA SSD Linux Mint):
USB-3 mSATA Dogfish 256GB Raspberry Pi 5:
$ sudo hdparm -tT /dev/sda
/dev/sda:
Timing cached reads: 6048 MB in 2.00 seconds = 3025.39 MB/sec
Timing buffered disk reads: 1084 MB in 3.11 seconds = 348.42 MB/sec
$ sudo dd bs=10M count=500 if=/dev/zero of=/home/pi/test.bin
500+0 records in
500+0 records out
5242880000 bytes (5.2 GB, 4.9 GiB) copied, 18.1698 s, 289 MB/s
SATA SSD ]under Linux Mint:
___@linux-mint:~$ sudo hdparm -tT /dev/sda
/dev/sda:
Timing cached reads: 3056 MB in 2.00 seconds = 1528.86 MB/sec
Timing buff..